Step up to exceptional all-weather visibility
Refer to this page to view step-by-step wiper blade installation instructions.
Removes even the smallest droplets for clear visibility and safer driving
Smooth and quiet operation
Technology upgrade for vehicles with conventional wiper blades
No metal or plastic brackets, joints or hinges for a clean, consistent wipe
Better resistance to ice and snow build-up for better performance and visibility in all weather
Applies uniform pressure along the entire blade length
Specific beam curvature for specialty wiper arm types
Uses air flow to increase blade-to-windshield contact
Shields tension springs from all weather elements
Exceptional performance in even the worst weather
Quick, secure connection
DirectConnect Adapter System
Tension Spring Technology
View Wiper Aging
Download printable PDFs of literature and brochures here.
Wipers should be changed when they no longer perform as expected, or no longer provide a high enough level of safety. The recommended replacement interval for preventative maintenance is 6 months. Bosch's exclusive dual-rubber technology can extend this interval to as much as 12 months, and Bosch ICON wipers last an average 40% longer.
Bosch ICON and Excel+ are the only wiper blades on the market that use this technology. The dual-rubber wiping element uses two different rubber formulations in the two areas which perform different tasks. For the wiping edge, that touches the windshield, a harder, more wear-resistant rubber is used than for the area that is responsible for making the wiping lip flip over properly when the direction of the wiper is reversed. This flip-over function is best provided by a softer, more flexible rubber. The two rubber types in combination result in better, lower-noise performance over a longer service life.
There are various indications for worn-out wipers; streaks, smears, unwiped areas on the windshield; chattering, skipping wiper blades; nicked, cracked or separated rubber elements; noisy wiping action due to worn-out wiper blade joints.
Wiper blades are important safety items even in the occasional rain shower. In dry climates, the rubber wiper elements are often subject to the aging effects of UV rays in sunlight and from heat. Dust, sand and other contaminants on the windshield can be damaging to the rubber wiping edge. Rubber formulations used by Bosch are highly resistant to these aging effects, but all blades need to be replaced eventually.
A wiper blade consists of the rubber wiping element and the superstructure with brackets and joints that distribute the arm pressure and give the blade its flexibility. A refill is just the rubber element and one or two tension springs inside the rubber element or on its outside.
Replacing just the refill is a low-cost alternative to changing the wiper blade. Changing the complete blade is typically much easier and faster than identifying and finding the proper refill and removing and replacing the old. Replacing a complete Bosch Wiper Blade is a quick and easy process due to the exclusive DirectConnect™ installation system used for most vehicle applications.
Replacing the refill too many times should be avoided as the wiper blade superstructure will wear out over time as well.
It is recommended to replace the driver’s side and passenger’s side wipers at the same time for improved vision and increased safety. Do not forget to replace rear-window wipers as well.
Most auto parts retailers carry Bosch premium wiper blades. This website provides information about Bosch ICON, Evolution, Excel+, MicroEdge and DirectConnect. Consult the vehicle part finder for the correct part numbers for your vehicle. Retail store counter personnel will be happy to help you with this question as well.
Windshield contamination is a common cause for poor wiper performance even if the wipers are still in good shape. Some kinds of contamination, such as tree sap, can destroy the wiping element in a short time. We recommend cleaning the windshield regularly with car wash soap as regular dish soap or hand soap can be corrosive to car paint. For tougher contamination, a non-abrasive household cleaner, such as Bon Ami, may be used.
Bosch Wiper Blades are designed with the do-it-yourself customer in mind. For most vehicle applications, the Bosch-exclusive DirectConnect™ installation system allows for quick and easy one-step installation without having to deal with adapters.
Other manufacturers need a rubber boot for their winter blades to protect against snow and ice. Even without the rubber sleeve, Bosch wiper blades offer better winter performance because the metal tension springs are enclosed in the rubber element rather than being exposed on its outside. The enclosed tension springs helps keep the wiper blade flexible and effective in wintry conditions.
Bosch conventional wiper blades feature a low-profile, aerodynamic design with vent holes in the center bracket. This design provides safety at high driving speeds. Bosch beam blades use aerodynamic spoilers to increase blade-to-windshield contact.
Bosch has been manufacturing electric windshield wiping systems for over 80 years. This knowledge of the entire wiping system helps Bosch understand what determines excellent wiper performance. Bosch supplies wiper systems and wiper blades to a large number of vehicle manufacturers. The expertise from original equipment manufacturing goes into each replacement wiper we make. Offered at various price levels, Bosch Wiper Blades are available for virtually every vehicle on the road.
OE beam technology
ICON Wiper Blades
Delivers quiet operation and a cleaner wipe
Excel+ Wiper Blades
Crystal clear visibility
MicroEdge Wiper Blades
One-step installation system
DirectConnect Wiper Blades
For all weather performance
Clear Advantage Blades
© Robert Bosch GmbH